{{results.messages.text}}
In great shape shifts smooth
{{results.messagesById['http://www.shoppok.com/eastky/a,43,92348,4L60e-transmission----400.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
1996 Nissan s14 ka24de 2.4 turbo engine and 5spd manual transmissionentire setup is in the running car currently.Ka24de-t and 5 speed transmissionexedy light weight flywheel wact stage 3 clutch kit, ISR short throw shifter.Ka-t 2.4 engine runs flawlessly and has always been maintained with oil changes done evey 3,000 miles.ka24de engine has T25 top mount turbo kit braided 4an feed 10an drain wi...
{{results.messagesById['http://www.shoppok.com/eastky/a,43,88640,ka24de-t-engine-and-5-speed-transmission-S14-S13240SX----4500--detroit-michigan-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Thanks for looking my avertissement this is real is not scamWe are on DALLAS TXDODGE TRANNYNV 4500 2WD 4WD I have recondition NV4500 5spPrice$1100 6 months warranty core exchangeTranny fit 89 to 05 diesel 5.9 Is five special if you want I can Rebuilt yours $300 labor PARTSANY QUESTIONS CALL JOE 8176806610NV 5600 3WD 4WD I have rebuilt transmissions NV5600 6sp 2wd 4wdTranny fit 5.9 Cummins from ...
{{results.messagesById['http://www.shoppok.com/eastky/a,43,91292,DODGE-TRANSMISSION-STANDARD-NV4500-NV5600-G56-ZF650-2WD-4WD----1100.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
transmission is in real good shape shifts smooth has 180 thousand miles on it
{{results.messagesById['http://www.shoppok.com/eastky/a,43,89769,2000-4L60e-transmission----300.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
condition like new make manufacturer 09 chevy gmc Newly rebuilt 17 pin transmission for 09 2wd models listed in title. Bought this for my 08 Colorado from a transmission builder in Michigan. The electrical connection for mine has less pins so it wouldnt work.This is a 4 sp wOD. trans. for a 3.7 litre gas motor. Rebuilt with all GM updates for this transmission model.Comes with Torque Converter....
{{results.messagesById['http://www.shoppok.com/eastky/a,43,89774,09-Chevy-Colorado---GMC-Canyon-Transmission----1000.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Low miles All the gears work Pulled out of a running and driving truck$175 cash
{{results.messagesById['http://www.shoppok.com/eastky/a,43,89255,2-2-5-speed-transmission----175--Beverly-Ky-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
This is a synchronizer gear for a 3 speed ford transmission that fits a ford 1957 to 1962 pass car also fits 1957 to 1962 ford f100 pickups without overdrive . The number for the part is 1AWT-253-2 1 original ford part # is C2AZ-7124A. It has been in storage for several years. It was remanufactured by the Perfection Gear Company. New old stock. Made in the USA. If you have any questions, call B...
{{results.messagesById['http://www.2040-parts.com/synchronizer-gear-3-speed-ford-1957-62-transmission-no-1aw253-2-1-2br-i1585286/']}}
This is a main shaft for Ford and Edsel Y Blocks, years 1958-62. The number for the part is WT259-16M. Fits a 3-speed transmission. It was remanufactured and has been in storage for several years. It was remanufactured by the Perfection Gear Company. New old stock. Made in the USA. If you have any questions, call Bill at (606)269-4906.
{{results.messagesById['http://www.2040-parts.com/main-drive-gear-ford-edsel-y-block-58-62-perfection-gear-3-speed-transmission-i1585284/']}}
Similar
1998 CHRYSLER SEBRING CONVERTIBLELOTS OF GOOD PARTS-RAN WHEN PARKEDMUST SELL DUE TO ILLNESSV6 ENGINE AUTOMATIC TRANSMISSION $$700 OBO
{{results.messagesById['http://www.shoppok.com/eastky/a,43,88618,1998-chrysler-convertible-PARTING-OUT----700--east-point-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Selling complete, 1983, 460 crankshaft with .010 bearings, new in box, performance 600HP 6000 rpm rods, .060 over flattop pistons, moly rings, with new harmonic balance and external crank weight, new 184 tooth flywheel for 1995 450 Super Duty or the 1983 C-6 flywheel. New timing cover gaskets with fuel pump, Ford high volume oil pump.Good clean used Offy dual port 460 intake with Eldebrock 750 ...
{{results.messagesById['http://www.shoppok.com/eastky/a,43,91289,Complete-1983-crank-kit-460-truck-engine--pistons-rods-heads----1600--Burnside--Ky-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
64 273 engine pulled from a 64 Barracuda. Engine is disassembled. Looks good to rebuild. Block, Heads, intake, distributor, crank, flat top pistons, valve covers, oil pan and flex plate. Also have the 904 automatic that was behind it, the driveshaft and rearend with springs and shackles. Will sell all together or seperate. Asking $200 OBO for the engine, $100 for the transmission, and $100 for ...
{{results.messagesById['http://www.shoppok.com/eastky/a,43,90324,64-mopar-273-engine---200-OBO----200--Kenova--wv-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Damaged, but have WV title. Its where we bought it in November I think. My son decided not to fix it. Will start and can move it a little to prove it runs. It has a busted radiator. I have pictures on here. If you need to see extent of damage better, Ill take any picture you want. The interior is in great shape. It can be fixed. Youll need a hood, bumper, fender, radiator, headlights, or use it...
{{results.messagesById['http://www.shoppok.com/eastky/a,43,89760,2002-Celica-GT----850--Floyd-county-KY-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Mopar 413 and 400 plus lots of extras like heads, motor mounts, carbs, headers, manifolds, cam, pistons, rockers, 440 crank, A518 auto transmission and so much more. Rather sell package deal. $1000 firmDodge, hot rod, rat rod, Chrysler, Plymouth, street rod, classic car, big block
{{results.messagesById['http://www.shoppok.com/eastky/a,43,89778,Mopar-big-block-400-and-413-with-lots-of-extras----1000.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
64 273 engine pulled from a 64 Barracuda. Engine is disassembled. Looks good to rebuild. Block, Heads, intake, distributor, crank, flat top pistons, valve covers, oil pan and flex plate. Also have the 904 automatic that was behind it, the driveshaft and rearend with springs and shackles. Will sell all together or seperate. Asking $225 OBO for the engine, $125 for the transmission, and $125 for ...
{{results.messagesById['http://www.shoppok.com/eastky/a,43,89267,64-mopar-273-engine---225-OBO----225--Kenova--wv-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
This is a sliding gear that fits a 3-speed transmission. Fits Ford 8-cylinder 1957-62, Ford 6-cylinder 1957-62, Ford Truck 1960-63, Edsel 1959, 332 Eng. The numbers for the part are: TG-259-12D and MFRS NO. COAR-7100A. It was remanufactured and has been in storage for several years. New old stock. Made by International Parts Corporation. If you have any questions, call Bill at (606)269-4906.
{{results.messagesById['http://www.2040-parts.com/sliding-gear-50-039-s-60-039-s-ford-cars-trucks-edsel-3-spd-trans-no-tg-259-12d-i1585290/']}}
This is a low gear that fits a 3-speed transmission. Fits 1963 Fairlane 289 engine, Ford 352-390engines , Mercury 390 engine. The number for the part is: 288-12. It was remanufactured and has been in storage for several years. It was remanufactured by the SOSMetal Company. New old stock. If you have any questions, call Bill at (606)269-4906.
{{results.messagesById['http://www.2040-parts.com/low-gear-1963-fairlane-289-ford-352-390-mercury-390-3-spd-trans-sosmetal-i1585285/']}}
This is a Classic Chevrolet reverse gear for models made in the 1950's and '60's. Fits: Chevys 1955-63 without overdrive and 1958-63 with overdrive. The number for the part is AWT-266 10 D. It was remanufactured and has been in storage for several years. It was remanufactured by the Perfection Gear Company. It fits a 3-speed transmission. If you have any questions, call Bill at (606)269-4906.Ne...
{{results.messagesById['http://www.2040-parts.com/classic-chevrolet-reverse-gear-1950-039-s-and-039-60-039-s-number-awt-266-10-d-3-spd-trans-i1585287/']}}
Post Ad